CNC Safety & Operational Notice

Disclaimer

Last Updated: November 2026 • Applicable to CNCSculpt Software & Services
Machining & Software Safety Notice: Operating CNC routers, lasers, and milling machinery involves physical motion, high-speed cutting tools, and mechanical risks. Please verify all toolpaths and clearances before executing physical carving.

1. General Information Disclaimer

The information, software tools, and 3D digital assets provided on CNC Sculpt (https://cncdesignhub.com/cncsculpt/) and through our desktop applications are designed for computer-aided relief sculpting, 3D design, and digital manufacturing. All services are provided on an “as-is” and “as-available” basis.

2. CNC Machine Operation & Workshop Safety Disclaimer

  • Operator Responsibility: CNC Sculpt generates 3D geometry files (such as STL, OBJ, and grayscale heightmaps). It does not directly command or drive physical machinery. The operator and CAM programmer bear sole responsibility for verifying tool selection, spindle RPM, feed rate, stepover percentage, safe Z-height, and material clamping before machining.
  • No Mechanical Liability: Under no circumstances shall CNC Sculpt, CNC Design Hub, its developers, or affiliates be liable for machine crashes, tool bit breakage, motor burnout, stock material waste, or personal injury arising from the use of exported files or improper machining parameters.
  • Simulation Requirement: We strongly advise all operators to execute toolpath simulations and “dry runs” (air cuts above workpiece surface) within their respective CAM software (such as Vectric Aspire, ArtCAM, or Fusion 360) prior to cutting physical stock.

3. Intellectual Property & User Content Disclaimer

Users retain 100% commercial ownership and intellectual property rights over all 3D bas-relief models and physical carvings produced using CNC Sculpt. However, the user is solely responsible for ensuring that source images, artwork, photos, or logos imported into the software do not infringe upon any third-party copyrights, trademarks, or intellectual property rights.

4. Third-Party Trademarks & Compatibility

Any references to third-party software, including Autodesk ArtCAM, Vectric Aspire, VCarve, Carveco, Blender, or Mach3/Mach4, are made strictly for informational purposes to describe file compatibility (e.g. STL / OBJ mesh formats). CNC Sculpt is an independent software application and is not officially endorsed by, sponsored by, or affiliated with the respective trademark holders.

Legal & Safety Inquiries

For inquiries regarding our safety guidelines or legal notices, contact us at: [email protected].